Line art
Pivot Hinge for Glass Door Recessed in Cabinet/Furniture
Product # D032033
-
$242.24
Pair
require glass milling
Can be mounted left or right. Mounting bracket must be installed a minimum of 2 mm from cabinet wall and 20 mm from shelves.
TECHNICAL SPECIFICATIONS
Product #
D032033
Load Capacity
Max. 55.1 lb*
Material
Solid Brass
Width
2 29/32 in*
Height
1 21/32 in*
Thickness of Glass
1/4 to 5/16 in*
Finish
Chrome
Width of Door to Respect
Max. 19 5/8 in*
Use Type
Glass
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
Note:
The hardware must be ordered before the execution of the project.
Always use the instruction supplied by the manufacturer inside of the packaging because: The manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
At any time the execution and installation must be done by qualified persons.
Never exceed the weight nor the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never used any spray lubricant on these products!
Maintenance: used a soft soap without ammonia and abrasive on a soft cloth(rag).
Picture for visual reference only!
Actual product may vary from photo shown!
Returns or claims for unpackaged products will not be accepted.
Exclusion from responsibility:
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are effected according to our most updated General Sales and Delivery Conditions.
The hardware must be ordered before the execution of the project.
Always use the instruction supplied by the manufacturer inside of the packaging because: The manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
At any time the execution and installation must be done by qualified persons.
Never exceed the weight nor the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never used any spray lubricant on these products!
Maintenance: used a soft soap without ammonia and abrasive on a soft cloth(rag).
Picture for visual reference only!
Actual product may vary from photo shown!
Returns or claims for unpackaged products will not be accepted.
Exclusion from responsibility:
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are effected according to our most updated General Sales and Delivery Conditions.
