Large Square Glass Clamp for Flat Surface Mounting, with Bottom Plate

Product # SSGC411XXZMB
  • $25.66

55 mm high with security plate

This clamp is designed for mounting a glass panel onto a flat surface. A safety
plate must always be used to prevent glass from slipping.

No need to drill through the glass. A protective gasket kit (sold separately) is required for installation.

ADVANTAGES AND BENEFITS

Stability and safety of the glass when the clamp is used with the safety plate.

No glass drilling is required when using the security plate.

REQUIRED PRODUCTS

Requires ONE of the following products
$1.13
OR
$1.13
OR
$1.13
OR
$1.13

TECHNICAL SPECIFICATIONS

Product #
SSGC411XXZMB
Type of Mounting
Wall Mount, Post Mount
Recommended Location Usage
Interior
Finish
Matte Black
Glass Drilling
Optional
Safety Glass Thickness
1/4 to 15/32 in*
Height
2 5/32 in*
Width
1 3/8 in*
Length
2 5/32 in*
Material
Zamak
Baluster Post Size
40 mm x 40 mm (1 9/16" x 1 9/16")
Adjustment
Fixed Position
Category
Clamps
Baluster Post Type
Square Tube
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

APPLICATION

Ideal for glass railings and ramp guardrails.

INCLUDED PRODUCT(S)

Large square clamp
Safety plate
Safety pin
M8 x 20 cylindrical head screws
Plastic screw cover

RELATED DOCUMENTS

DISCLAIMER

If a saftey plate is not used during installation, there is a risk the glass will slip.

Ensure the use of proper gaskets, according to the thickness of the glass panel.

Safety glass is always recommended.

Product image is provided for reference only. The product may differ from the illustration.

Order hardware before undertaking manufacturing or assembly work.

Always follow instructions on product packaging as the manufacturer reserves the right to modify any product or product information without prior notice.

All technical drawings and documents illustrate examples of mounting strategies. In no case may the client make a claim based on use of the technical documents. The manufacturer declines any responsibility regarding the structural details of any installation or project involving the hardware.

Alway ensure that installation is carried out by qualified professionals. Always ensure that the product is mounted onto an appropriate material.